Don't brick yourself with this straight forward airsoft mortar

Qty Description Cost
1 Scaffolding pole (40mm inner diameter) FREE
1 Zinc Chain (0.5m) £2.00
1 Two point sling £5.00
1 Steel Square Tube (16mm x 16mm x 2m) £8.00

Total Cost: £15.00

One of the first pieces constructed, very much like the RPG, this uses a 40mm inner diameter scaffold and a number of other small offcuts. to produce an effective, yet simple mortar ideal for airsoft scenario use. This design is not based on any authentic equipment, instead it was created as a proof of concept in preparation for future models.

Continue reading “Don't brick yourself with this straight forward airsoft mortar”

Rocket yourself to success with your very own rocket propelled grenade launcher

Qty Description Cost
1 Bi-pod Foregrip (Picatinny Rail) £8.00
1 Scaffolding pole (40mm inner diameter) FREE
1 Rubber 33-35mm Scope Recoil Eye Protector £12.00
1 Grip and trigger (salvaged) FREE
1 Two point sling £5.00

Total Cost: £25.00

This piece was constructed entirely by my dad, using a lot of salvaged or re-used parts that kept the cost down significantly. The scope, rails, grip and trigger system was taken and modified from an old VFC Scar airsoft weapon. Using the correct diameter pole allows 38mm thermobaric smoke grenades (or similar projectiles) to be propelled a good distance and prove very affective.

Continue reading “Rocket yourself to success with your very own rocket propelled grenade launcher”

Leave an impression with blocks of fake C4 explosive

Qty Description Cost
6 Newclay 1kg Air Drying Model Clay £15.00
1 A4 Recycled Kraft Paper 100gsm 50 sheets £6.00
1 Shrink Wrap Film 88g (100 sheets) £4.00

Total Cost: £25.00

In addition to the these items you will need access to printing facilities, sticky tape and the basic ability to use a graphics editing program, such as Adobe Photoshop. If you aim to shrink wrap the blocks an Impulse heat sealer is ideal.

Continue reading “Leave an impression with blocks of fake C4 explosive”